Introduction

This manual gives instructions for correct servicing and adjustment of the Bobcat, and overhaul instructions of the hydraulic system, electrical system, engine, and general mainframe parts.
Make reference to the Owner’s Manual for operating instructions (Starting Procedure, Daily Checks and Maintenance, Bobcat Operation, etc.).

A general inspection of the following items should be made whenever the loader has had service or repair:

1. Check hydraulic fluid level, engine oil level, and fuel supply.
2. Inspect for any fuel, oil, or hydraulic fluid leaks.
3. Lubricate the loader.
4. Check battery condition, electrolyte level, and cables.
5. Inspect air cleaner system for damage or leaks. Check element and replace as needed.
6. Check electrical charging system.
7. Check indicator lamps.
8. Check tires for wear and pressure.
9. Check the Bob-Tach attachment for condition. Inspect the wedges for damage or wear.
10. Inspect safety items for condition (Operator Enclosure, Seat Belt, Safety Treads, Lamps, etc.).
11. Make visual inspection for loose or broken parts or connections.
12. Operate the loader, checking all functions.

Check the above items. If any are in need of repair, tell the Owner:

CONTENTS
ALPHABETICAL INDEX 9
DRIVE SYSTEM 3
ELECTRICAL SYSTEM 5
ENGINE 310 6
ENGINE 313 7
HYDRAULIC SYSTEM 2
MAIN FRAME 4
PREVENTIVE MAINTENANCE . .1